?What causes the washing machine water not to heat up
What causes the washing machine water not to heat up?
There are several reasons why the washing machine water does not heat up, we will examine each of these in this article.
What causes the washing machine water not to heat up?
Note that whether or not your washing machine heats the water also depends on the model of the washing machine. In the newer models, if the water temperature does not reach the set temperature, it displays an error code so that you can see that the washing machine water is not heated, but in the older models, even if the washing water temperature is set to the set value. If not, the machine will continue to work and to find out, you must touch the door while the machine is working.
What causes the washing machine water not to heat up?
The first recommendation is to be sure to contact a reputable laundry repair center to make the best possible repairs.
Connected to the washing machine are hot and cold water inlet hoses and drain hoses. Also connected are solenoid valve, temperature control keys and water volume adjustment.
Once the water enters the washing tank and reaches a certain level, the hydrostat deactivates the solenoid valve. During this dewatering process, if there is a problem for any of the mentioned parts, the dewatering process will face problems.
What causes the washing machine water not to heat up?
5reasons why the water in the washing machine does not heat up:
-Thermostat defective
–Hydrostat failure
-Timer failure
-Defective hot water hose
-Solenoid valve failure
Thermostat defective
The reason why the washing machine water does not heat up is that the thermostat is broken.
The main function of the thermostat in the washing machine is to keep the washing temperature constant. If the washing temperature is set properly, the water temperature will also be adjusted.
If the thermostat is broken, or the wires that are connected to it are damaged or completely disconnected, you should refer to the manual and check the wires that are connected around.
Hydrostat failure
Problems with the hydrostat may be the cause of the washing machine not heating up.
The hydrostat regulates the water level in the washing machine, the hydrostat has the initial adjustment and the initial adjustment is done by the factories.
If this part is damaged, the hydrostat of the washing machine should be adjusted.
Timer failure
Timers are a tool that regulates the washing time in the washing machine. It has sometimes been observed that, for example, when we choose a hand washing program, the water heats up well, but when we change the washing program to woolen clothes, the water does not heat up. So the problem is working in the timer. The timer is installed on the washing board. If the timer is damaged, it should be removed from the board and repaired.
What causes the washing machine water not to heat up?
Problems with hot water hoses
There is no hot water hose in some places and kitchens. If the hot water hose is not connected or is completely closed, the water in the washing machine will not heat up and must be repaired or the hose replaced.
The length of the hoses connected to the washing machine is between one and one and a half meters, the material of the hoses should be very durable and not punctured easily.
They are made of plastic and there is a mesh filter at the junction of the hose where the water comes out of the pipe.
The use of this wire mesh filter is to prevent pebbles and debris from entering the washing machine, but sometimes it has been seen in laundry repairs that due to the severity of scale and debris in that area, the repairmen have been forced to replace the filter.
Solenoid valve failure
Make sure the water pipe is not corroded or worn and is perfectly flat.
To replace the mesh filter, close the faucet, then remove the hose and clean the wire mesh of scale and debris.
If it was not cleaned, you should buy another one and replace it, after replacing or cleaning the filter, reconnect it to the water hose.
Open the faucet. Of course, you need to put an empty bucket at the end of the hose.
If the water comes out of the hose with full pressure, it means that the filter is not faulty, if the water still does not have pressure, you have to clean it again.
Check the water inlet solenoid valve to solve the problem of not washing the water of the washing machine
The supply of cold water and hot water in the washing machine is the responsibility of the solenoid valve. The solenoid valve has two coils that are responsible for operating the inlet valve to supply cold and hot water.
When the washing machine is on, check that the power is directed to the solenoid coil.
?What causes the washing machine water not to heat up
If there is electricity on the spool but no water enters, it means that the washing machine solenoid valve is broken and you have to replace it.
If there is no electricity, other factors should be considered.
If you have a problem with the voltage of the solenoid valve, you can turn off the coils and test with a device called ohmmeter.
After testing and checking if any of the coils are damaged, the device no longer works, you need to get a new solenoid valve.
?What is the reason for not letting hot water into the washing machine
Choosing the wrong temperature is one of the reasons why hot water does not enter the washing machine:
The important point is that if the selected temperature is higher than 50 degrees Celsius or exactly 60 degrees Celsius, water enters the device from the hot water inlet, and if the temperature of the selected program is lower than 60 degrees Celsius, the element in the device automatically draws water. It heats up and we no longer need a solenoid valve to heat it.
Electronic failure is another reason why hot water does not enter the washing machine
A small defect in the electronic circuit disrupts the operation and mechanism of the washing machine; the washing machine has several components such as capacitors and fuses. The causes that cause the washing board to burn are the fluctuations caused by the electricity in the washing board.
Another cause of burning the washing board is water entering the machine.
What causes the washing machine water not to heat up?
If the water tank leaks, it will also cause the washing board to burn out.
What clothes can you wash with cold water?
In this section, you will be given tips for washing clothes with cold water, and following these tips can help you consume a lot of energy.
In clothes that use synthetic fibers, such as sportswear, the best way to eliminate the smell of sweat is to use cold water.
?What causes the washing machine water not to heat up
In general, placing clothes in cold water and washing them again with cold water will make their color and material remain the same and will prevent them from wrinkling.
I hope this article has helped you if you have any experience in this field with us
